-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- i need to update my hp compad pro 6300 SFF bios

Create an account on the HP Community to personalize your profile and ask a question
10-26-2023 05:20 AM
my device bios is k01 v2.05 and i want to update this
Solved! Go to Solution.
Accepted Solutions
10-26-2023 07:08 AM
Hi:
If you want to update the BIOS to the latest version (00.03.08), it is a two-step process.
You have to first update the BIOS to v.02.99, and then update it to 00.03.08
Since your PC is not supported by HP for W10, I recommend that you update the BIOS using the F10 BIOS setup flash method.
Format a USB flash drive with the FAT 32 file system.
That is very important to format the flash drive with the right file system.
Download and save, but do not run (sp73099). That is the v02.99 file.
https://ftp.hp.com/pub/softpaq/sp73001-73500/sp73099.exe
Use this free tool to unzip the HP BIOS download (sp73099)
The 1st file at the top of the page is for 64 bit.
After you install 7-Zip, right click on the sp73099 BIOS update file you downloaded and saved.
Have 7-Zip Extract to: And let it extract the file into its folder name.
Once that is done, open the folder 7-Zip created, and copy only the file contents of the DOS flash folder to your FAT32- formatted USB flash drive.
Before you update the BIOS, it is normally a good practice to disconnect everything hooked up to the PC except the keyboard, mouse, monitor and the USB flash drive with the DOS BIOS flash files on it.
So, shut down the PC and remove anything connected to the PC except the above items.
Once you have done that...
Turn on the PC, tap the ESC key to get the menu of options.
Select the F10 Setup menu and press the enter key.
Select the File menu>Flash System ROM command.
Select the USB flash drive and the PC should now see the files on the flash drive.
Follow the on-screen instructions to update the BIOS.
Then follow the same procedure to update the BIOS from 02.99 to 03.08.
Here's the link to v.03.08:
10-26-2023 07:08 AM
Hi:
If you want to update the BIOS to the latest version (00.03.08), it is a two-step process.
You have to first update the BIOS to v.02.99, and then update it to 00.03.08
Since your PC is not supported by HP for W10, I recommend that you update the BIOS using the F10 BIOS setup flash method.
Format a USB flash drive with the FAT 32 file system.
That is very important to format the flash drive with the right file system.
Download and save, but do not run (sp73099). That is the v02.99 file.
https://ftp.hp.com/pub/softpaq/sp73001-73500/sp73099.exe
Use this free tool to unzip the HP BIOS download (sp73099)
The 1st file at the top of the page is for 64 bit.
After you install 7-Zip, right click on the sp73099 BIOS update file you downloaded and saved.
Have 7-Zip Extract to: And let it extract the file into its folder name.
Once that is done, open the folder 7-Zip created, and copy only the file contents of the DOS flash folder to your FAT32- formatted USB flash drive.
Before you update the BIOS, it is normally a good practice to disconnect everything hooked up to the PC except the keyboard, mouse, monitor and the USB flash drive with the DOS BIOS flash files on it.
So, shut down the PC and remove anything connected to the PC except the above items.
Once you have done that...
Turn on the PC, tap the ESC key to get the menu of options.
Select the F10 Setup menu and press the enter key.
Select the File menu>Flash System ROM command.
Select the USB flash drive and the PC should now see the files on the flash drive.
Follow the on-screen instructions to update the BIOS.
Then follow the same procedure to update the BIOS from 02.99 to 03.08.
Here's the link to v.03.08: