i wanna know if i can enable virtuilization without the use of my first monitor

[1zo-]

my screen is broken and i have been using another monitor for the longest and i hav ebeen wondering if i can enable virtuilization of my computer without the use of my first monitor i tried to do it already but the second monitor blacked out so it wont let me do that and i triedto connect it to my tv and that alos does not work 

[Raj_05]

Hi @1zo-,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

Enabling virtualization on your HP All-In-One 22 without using the built-in monitor can be a bit tricky, especially if your external monitor goes black during the process. However, there are a few approaches you can try to enable virtualization using only your external monitor. Here are some steps and tips that might help.

Using BIOS/UEFI

1. Connect External Monitor: Make sure your external monitor is properly connected to the HP All-In-One and is set as the primary display.
2. Access BIOS/UEFI:
   • Restart your computer.
   • During the startup process, press the appropriate key to enter the BIOS/UEFI setup. This key is often F10, Esc, Delete, or F2. The exact key can vary, so check the HP documentation or try pressing these keys during startup.
3. Enable Virtualization:
   • Once in the BIOS/UEFI setup, navigate using the keyboard (as mouse support might be limited).
   • Look for a section related to Advanced, CPU Configuration, or System Configuration.
   • Find an option called Virtualization Technology, Intel VT-x, or similar.
   • Set it to Enabled.
4. Save and Exit:
   • Save the changes you made and exit the BIOS/UEFI setup. This is typically done by pressing F10 or selecting the Save & Exit option.

Tips if External Monitor Blacks Out

• BIOS/UEFI Update: Ensure your BIOS/UEFI firmware is up to date. Sometimes an update can fix issues with external displays in BIOS mode.
• Use Keyboard Shortcuts: If the external monitor goes black, try using keyboard shortcuts blindly to enable virtualization. You might need to refer to a guide or video showing the exact steps in your BIOS/UEFI to memorize the sequence.
• Disconnect Internal Monitor: If possible, disconnect the broken internal monitor physically. Sometimes, this can force the system to use the external monitor as the primary display even in BIOS/UEFI mode.

Alternative Method Using Software

If accessing the BIOS/UEFI setup via the external monitor proves difficult, consider using software solutions to enable virtualization. This method might not work if the option is only available in BIOS/UEFI, but it’s worth a try.

Windows Hyper-V:

• Open Control Panel.
• Go to Programs > Turn Windows features on or off.
• Check Hyper-V and click OK. Follow the prompts to install.

Virtualization Software:

• Use third-party software like VMware or VirtualBox. These applications sometimes can enable certain virtualization features through their settings.

By trying these methods, you should be able to enable virtualization on your HP All-In-One 22 even with a broken built-in monitor.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support