-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Software and How To Questions
- HP Compaq Pro 6300 MT PC blank screen fans spinning after BI...

Create an account on the HP Community to personalize your profile and ask a question
09-11-2022 09:24 AM - edited 09-11-2022 09:26 AM
I have recently received this system and I was touching it up and preparing it for somebody by updating all the firmware.
It was on firmware 2.0x (I forgot the exact number). I could not update right away to 03.08, that would fail. I figured I would have to step through all the BIOS editions posted under the Windows 7 section.
I updated to 2.57, this worked without issues.
Afterwards I updated to 2.90, but now the system is no longer giving any display. The system powers on and the fans spin but nothing is happening.
What I have I have tried:
- CMOS reset (removing CMOS battery, unplug power, and holding power button for 30 - 60 seconds)
- BIOS recovery according to the documentation provided by the BIOS update
The BIOS documentation says in case a BIOS failure has happened (I'm not sure if a failure happened), put the .BIN file found in the DOS flash folder on the root of a USB stick and plug it into the desktop computer. I have done so and left the computer to be for 20 - 30 minutes but it has made no difference.