HP Desktop PC M01-F3000a help with setting it up

[LiLSIlver]

Help with HP Desktop PC M01-F3000a so it can turn on my All in one Desktop Computer when turn on the button its connected to it just need to have it officially connected the cord is already running from it to my all in one desktop 

[Kuroi_Kenshi · Accepted solution]

Hi @LiLSIlver,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding PC!  

We're thrilled to have the opportunity to assist you and provide a solution.

It sounds like you're trying to set up your HP Desktop PC M01-F3000a so that it powers on your All-in-One (AIO) desktop computer when you turn it on. If you have already connected a power or data cable between the two devices, here are some steps to ensure they are properly configured:

1. Verify Power & Connections

• Make sure the power cable for both your HP Desktop and AIO Desktop is plugged into a working power outlet.
• Ensure that any USB, HDMI, or DisplayPort cables connecting the two systems are securely plugged in.

2. Configure BIOS Settings

If your All-in-One desktop is supposed to power on when the HP Desktop PC turns on, you might need to adjust settings in the BIOS of your HP Desktop.

Steps to Access BIOS:

1. Turn off your HP Desktop PC M01-F3000a.
2. Power it on and immediately start pressing F10 (or Esc, then select BIOS) repeatedly until the BIOS Setup opens.
3. Navigate to Advanced Settings or Power Management (depending on your BIOS version).
4. Look for an option like:
   • Wake on LAN (if you're using a network connection)
   • Wake on USB (if you're using a USB connection)
   • Power on by AC (if it's related to power flow)
5. Enable the relevant setting, then Save and Exit (usually by pressing F10).

If none of this work, let me know more details about how your HP Desktop and AIO are connected so I can guide you better! 😊

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?"—your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,

[LiLSIlver]

was confusing a lil but I didnt see that option it took me to the BIOS Setup Utility menu still wasnt able to setup  HP Desktop PC M01-F3000a so I can have it connected to my HP all in one PC, on my BIOS Setup Utility it shows Main, Security, Configuration, Boot Options, Exit which one do I suppose to go to and what do I look for to connect it to my PC so I can just power it on to turn on my Desktop PC