07-15-2019 09:06 AM
Everything worked well powered off at the end of the day came in unit will not power on completely dead will not respond to power button, unplugged everything power source is good to computer, but will not turn on?
07-17-2019 10:23 AM
Thank you for posting your query on HP Community,
This looks like a possible hardware failure with the PC. However, I would recommend you try these steps here:
Perform a Hard reset on the PC:
Many startup errors and other problems can be resolved by decreasing the amount of power stored in hardware components. Decreasing stored power is sometimes referred to as a "Hard Reset". Use the following steps to perform a hard reset on a computer:
1. If Windows is open, click Start and then Shutdown.
If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off.
2. With the power off, disconnect the power cord from the back of the computer.
3. With the power off and the power cord disconnected, press the power button on the computer for 5 seconds. The power light indicator on or near the power button might turn on briefly but then go out.
4. Reconnect the power cord and turn on the power.
You may follow the steps from this support document to ensure you have followed all the steps before confirming this to be a hardware issue. HP PCs - No Power or No Boot Guided Troubleshooter
Alternatively, you may make use of this video for - Click here
If you have followed the steps suggested and still having the issue. I would suspect this to be a possible hardware failure.
I would recommend you contact our HP support team for further assistance.
HP support team can be reached on this link.
That said, If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!
Have a great day!
I am an HP Employee