HP Performance tune up check

[Al1cat]

HP Performance tune up is stuck at 40%

[Riddle_Decipher]

@Al1cat Due to the current global COVID-19 situation, we're seeing an influx of customers coming in for support and we appreciate your patience.

That said, Did you make any software or hardware changes on your laptop?

Are you using any high-end application or playing a graphic oriented game on your PC?

Try the steps recommended below to restore BIOS to default.

1.    Turn off the computer and wait five seconds.
2.    Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3.    On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4.    Press F10 to Save and Exit.
5.    Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6.    Follow the prompts to restart your computer.
 

Also, I would suggest you enable Fast Start-Up on the system and check if it helps. To do this, follow the steps below.
1. Open Control Panel and go to Power Options.
2. Click/tap on the Choose what the power buttons do link on the left side.
3. Click/tap on the Change settings that are currently unavailable link at the top.
4. If prompted by UAC, then click/tap on Yes. 
5. Ensure that Turn on Fast Startup is checked.
6. Restart the computer.

If the issue still persists after trying out the steps try the steps recommended below.

In Windows, search for Command Prompt. In the search results, right-click Command Prompt and select Run as administrator. Then click Yes.
In Command Prompt, type sfc /scannow. Make sure to include the space between sfc and the /.
Press Enter and wait while System File Checker scans for corrupted files.
When scanning is complete, the results are displayed on the screen.
If the file checker found and replaced any corrupted files, restart the computer and check the performance.
If the file checker did not find any corrupted files or found corrupted files but could not replace them, go to the next step.
If System File Checker finds corrupted files but cannot replace them, use the Deployment Image Servicing and Management (DISM) tool. DISM checks the corrupted files; then downloads and replaces the files using Windows Update.
In Windows, open a web browser.
   NOTE:
You need to be connected to the Internet to use DISM.
In Windows, search for Command Prompt. In the search results, right-click Command Prompt and select Run as administrator. Then click Yes.
In Command Prompt, type dism.exe /Online /Cleanup-image /Restorehealth. Make sure to include the space before each / in the command line.
Press Enter and wait while DISM works. This might take several minutes.
If DISM finds corrupted files, it replaces them using Windows Update. If this occurs, after DISM is finished, restart your computer and see if the performance has improved.

Let's try updating the Bios, Chipset and Graphics driver on your PC, using this link or download it using HP support Assistant.

Try updating other drivers on your PC using HP support assistant.

Refer this article to know more information about using the HP support assistant.

Once done, restart the notebook. 

If the issue persists, I would suggest you run an extensive system test from F2 and check if the hardware components on your PC are functioning correctly.

1. Hold the power button for at least five seconds to turn off the computer.

2. Turn on the computer and immediately press Esc repeatedly, about once every second.

When the menu appears, press the F2 key.

3. On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.

4. Click Extensive Test.

5. Click Run once, or Loop until error.

While the test is running, the time remaining and test result for each component are

shown on the screen.

6. If a component fails a test, write down the failure ID (24-digit code) so you have it

available when you contact HP Customer Support. The information is also available in

Test Logs on the main menu.

Refer this article to know more information about running system diagnostics on your PC. Click Here

You may refer to this support document for - HP PCs - Improving PC Performance (Windows 10)

P.S: Welcome to HP Community 😉

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us, 

have a good day, ahead.