How to unpair/pair the HP Rechargeable MPP 2.0 Tilt Pen and how to turn it off

[Bob1116]

So i bought the HP Rechargeable MPP 2.0 Tilt Pen and i was already connected but i have no clue how to turn it off or unpair it to save battery. And once upaired how to pair it again, i have watched every video and did every thing but it seems it does not work / is a other model of pen that does not work.

[A_Gayathri]

Hi @Bob1116,

Welcome to The HP Support Community.  

Thank you for posting your query, I will be glad to help you.

I understand you want to unpair the HP Rechargeable MPP 2.0 Tilt Pen from your HP Envy X360 15.6 Inch 2-In-1 Laptop PC 15-Fe0000 (79J40AV) and turn it off, you can follow these steps:

Unpairing the Pen:

• Go to your laptop's settings or control panel.
• Look for the "Bluetooth & other devices" section.
• Find the HP Rechargeable MPP 2.0 Tilt Pen listed under paired devices.
• Click on the pen's name and select the option to remove or unpair it.

Turning off the Pen:

• After unpairing, you can manually turn off the pen by pressing and holding the power button (if available) for a few seconds until the indicator light turns off if there's any.

To pair the pen again:

1. Pairing the Pen:
   • Make sure your pen is charged.
   • Put the pen in pairing mode. This typically involves pressing and holding a specific button on the pen until an indicator light starts flashing rapidly.
   • On your laptop, go to the Bluetooth settings again.
   • Click on "Add Bluetooth or other device" and select Bluetooth.
   • Your laptop should detect the pen in pairing mode. Click on it to pair.

Refer to this document: HP Envy x360 15.6 inch 2-in-1 Laptop PC 15-fe0000  User manual

I hope this helps. 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!