I have updated my bios in my system and my system crashes after that

[Jaweed11]

I have updated my BIOS from AMI F .35 to AMI F.45 and my system crashes after i boot it within 5 minutes. I cannot operate my system properly.

Anyone who has any solution for it please help me out with this.

Thank you .

[Irfan_06]

Hi @Jaweed11,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I see that you are facing an issue with your PC.

-Perform a power drain on your PC.

1) Unplug the power cord from the PC & wall.

2) Disconnect the power cable from the AC adapter if it is a detachable part and keep it aside.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the AC adapter, then connect it to the wall and to the charging port on your PC.

5) Power on the PC and check if it boots into Windows now.

-Install all the pending updates for the Windows operating system following the below steps.

go to Start > Settings > Update & Security > Windows Update and select Check for updates. If the upgrade is available for your device and you want to proceed, download and install it.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

 

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support