cancel
Showing results for 
Search instead for 
Did you mean: 
jrgo1
New member
1 0 0 0
Message 1 of 2
793
Flag Post

Intel Management Engine Software, SP110374, 2031.15.,0.1743 Rev A : Fatal error during installation

HP Recommended
Z2 G4 Tower Workstation
Microsoft Windows 10 (64-bit)

Intel Management Engine Software SP110374, 2031.15.0.1743 Rev A will not install. I receive the error message: The setup program ended prematurely because of the following error: Fatal error during installation. I have already installed Intel C246 chipset and Intel chipset drivers for Windows 10 without incident.

1 REPLY 1
Prométhée
Level 16
Level 16
6,098 6,026 667 2,473
Message 2 of 2
Flag Post
HP Recommended

hi

sorry not sure

but find this :

HOW TO USE:
This package contains Intel Management Engine Software installer version 2031.15.0.1249 for Microsoft Windows operating systems. Intel Management Engine Software installer version 2031.15.0.1249 has support for HP Workstations with Intel Management Engine firmware 11.8, 11.12, 11.22, 12.0, and 14.0. The following driver versions will be installed.

- Management Engine Interface (MEI) 2023.15.0.1249
- Serial-Over-LAN (SOL) 2011.0.7.0

This SoftPaq does NOT include a system BIOS or Management Engine Firmware (ME FW). It is highly recommended to update your system to the latest BIOS and ME FW. The latest BIOS and ME FW is available at https://support.hp.com/.

PREREQUISITES:
1) Intel Management Engine must be enabled in BIOS. The option to enable ME is located in the Advanced menu under Remote Management within BIOS setup (F10 BIOS menu -> Advanced -> Remote Management). Please note, older BIOS versions may only include a single option to enable Intel ME via Intel AMT. The Intel AMT option must be enabled in order to enable Intel ME. Newer BIOS versions include separate options to enable Intel ME and Intel AMT independently. In these cases, Intel ME must be enabled, while Intel AMT may be enabled or disabled.
1. Download and extract the Intel Management Engine Software SoftPaq.
2. Browse to the SoftPaq location. (c:\SWSETUP\SP110374)
3. Double click SetupME.exe to launch the Intel Management Engine install process.
4. Follow on-screen instructions.

Copyright Copyright (c) 2020 HP Development Company, L.P.

maybe help ?

 

Please remember to mark the answers this can help other users
please click on the accept as solution button if message provided an answer to the problem

was this reply helpful , or just say "thank you " ?  Click on the yes button



Desktop-Knowledge-Base
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation