• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines

Featured blog article:

Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
OMEN 30L Desktop PC GT13-1000a (207P7AV)
Microsoft Windows 11

Hello. I purchased an OMEN 30L PC off of facebook marketplace recently, and it runs great except for a few hiccups. The more annoying one involves the RGB lighting, which does not respond to changes made in the OMEN lighting studio. The lights remain off until, seemingly at random they will begin rapidly powering on and off with a default white hue. While this is occurring the performance of the PC drops severely, I'm assuming due to the power draw. All drivers are up to date, and the lighting studio was uninstalled and reinstalled unsuccessfully. Windows is up to date

1 REPLY 1
HP Recommended

Hi @ricosuaveee,

Thanks for the details. On the OMEN 30L, LEDs flashing rapidly in default white with a performance drop usually means the RGB controller or a USB/RGB connection keeps resetting, which can happen if the previous owner changed fans or used other RGB software.

Option 1 – Software

  1. Uninstall any third-party RGB tools (iCUE, OpenRGB, SignalRGB, etc.) that may have been installed.
  2. Update the BIOS and OMEN Gaming Hub from https://support.hp.com/drivers, then set lighting in OMEN Gaming Hub > Light Studio/Lighting.
  3. Shut down, unplug the PC for 60 seconds and power on.

Option 2 – Check the connections

  1. With the PC off and unplugged, open the side panel and check that the RGB cables from fans/front panel go to the HP RGB controller and are firmly connected. If non-HP fans were added, disconnect them to test.
  2. Check Event Viewer > Windows Logs > System for repeated USB device disconnects when the flashing starts.

If the flashing continues with only the original parts connected, the RGB controller may be faulty.

Let me know what you find!


I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).


† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.
-->