• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP ENVY Desktop - 750-114
Microsoft Windows 10 (64-bit)

My 750-114 desktop has always run fine, but I just found out that numerous BIOS updates are available for it. Can I assume that these updates are not critical or should I update?  If I should update the system, should I just use the "newest" update (2018) or should all the updates be done in date sequence?

Thanks in advance... B>)

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi:

 

Below is the link to the product specs for your PC.

 

HP ENVY 750-114 Desktop PC Product Specifications | HP® Customer Support

 

It has the Odense motherboard which has a SSID of 2B47.

 

The only BIOS update out of the 5 listed on your notebook's support page that will work for your PC is this one:

 

Driver - HP ENVY Desktop - 750-114 | HP® Customer Support

 

What I recommend you do before considering updating the BIOS would be to read all of the release notes for the current and previous BIOS updates HP released for your PC.

 

Those updates are listed when you click to expand the Revision History section on the above link.

 

BIOS updates are cumulative, so the latest update will include any fixes or enhancements the previous ones included.

 

One very important note:  If you update the BIOS to the latest version, you will not be able to go back to an earlier version and that can be said for several of the other older updates.

 

Version: A0.20 Rev.A

Fixed in this release: - Updates the microcode for Intel processor security enhancement.

 

Version: A0.19 Rev.A

Fixed in this release: - Updated the Intel CPU microcode 0xBA for R0/S0 stepping processor.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

Version: A0.18 Rev.A

Fixed in this release: - Fixes issue where the PCI Express link fails to train (or retrain) when in Hybrid Graphics Mode.
- Improves security of UEFI code and variables. HP strongly recommends promptly transitioning to this updated BIOS version which supersedes all previous releases.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

Version: A0.17 Rev.A

Fixed in this release: - Fixes issue where the DVD/BD title would not automatically play with PMP14 after inserting it into the ODD.

Version: A0.16 Rev.A

Fixed in this release: - Fixes issue where the BIOS could be corrupted if the system idles for more than 14 hours
- Fixes issue where the system could be in recovery mode after updating BIOS.
- Adds support for Micron DDR3 P-die memory.
- Updates the Intel CPU microcode 0x84 for R0/S0 stepping processor.
- Updates the Intel ME firmware to v11.0.1.1001.
- Updates the HP Basic Diagnostics to v1.16.
- Updates the HP logo.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

Version: A0.12 Rev.A

Fixed in this release: - Fixed issue where all USB ports will still function in windows after disabling all USB ports and M.2 slots under
the BIOS Setup.
- Fixed issue where the WLAN device still shows in the device manager after disabling the M.2 Card Slot 1 under the BIOS Setup and restarting the system from windows.
- Updated the Intel RC code.
- Updated the Intel MRC code.
- Updated the Intel CPU microcode for R0/S0 stepping processor.
- Updated the Intel GOP to v9.0.1036.
- Updated the Intel VBIOS to v9.0.1030.
- Updated the Intel ME firmware to v11.0.0.1180.
- Improved security of UEFI code and variables. HP strongly recommends promptly transitioning to this updated BIOS version which supersedes all previous releases.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

Version: A0.10 Rev.A

Fixed in this release: - Updated the Intel RC code.
- Updated the Intel MRC code.
- Updated the Intel CPU microcode.
- Updated the Intel GOP to v9.0.1035.
- Updated the Intel VBIOS to v9.0.1028.
- Updated the Intel ME firmware to v11.0.0.1173.
- Supported the new chassis FAN control.
- Supported the WD 3TB HDD.
- Improved the POST time.
- Fixed the system can't enter S3, after the AC power remove.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

 

 

View solution in original post

3 REPLIES 3
HP Recommended

Hi:

 

Below is the link to the product specs for your PC.

 

HP ENVY 750-114 Desktop PC Product Specifications | HP® Customer Support

 

It has the Odense motherboard which has a SSID of 2B47.

 

The only BIOS update out of the 5 listed on your notebook's support page that will work for your PC is this one:

 

Driver - HP ENVY Desktop - 750-114 | HP® Customer Support

 

What I recommend you do before considering updating the BIOS would be to read all of the release notes for the current and previous BIOS updates HP released for your PC.

 

Those updates are listed when you click to expand the Revision History section on the above link.

 

BIOS updates are cumulative, so the latest update will include any fixes or enhancements the previous ones included.

 

One very important note:  If you update the BIOS to the latest version, you will not be able to go back to an earlier version and that can be said for several of the other older updates.

 

Version: A0.20 Rev.A

Fixed in this release: - Updates the microcode for Intel processor security enhancement.

 

Version: A0.19 Rev.A

Fixed in this release: - Updated the Intel CPU microcode 0xBA for R0/S0 stepping processor.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

Version: A0.18 Rev.A

Fixed in this release: - Fixes issue where the PCI Express link fails to train (or retrain) when in Hybrid Graphics Mode.
- Improves security of UEFI code and variables. HP strongly recommends promptly transitioning to this updated BIOS version which supersedes all previous releases.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

Version: A0.17 Rev.A

Fixed in this release: - Fixes issue where the DVD/BD title would not automatically play with PMP14 after inserting it into the ODD.

Version: A0.16 Rev.A

Fixed in this release: - Fixes issue where the BIOS could be corrupted if the system idles for more than 14 hours
- Fixes issue where the system could be in recovery mode after updating BIOS.
- Adds support for Micron DDR3 P-die memory.
- Updates the Intel CPU microcode 0x84 for R0/S0 stepping processor.
- Updates the Intel ME firmware to v11.0.1.1001.
- Updates the HP Basic Diagnostics to v1.16.
- Updates the HP logo.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

Version: A0.12 Rev.A

Fixed in this release: - Fixed issue where all USB ports will still function in windows after disabling all USB ports and M.2 slots under
the BIOS Setup.
- Fixed issue where the WLAN device still shows in the device manager after disabling the M.2 Card Slot 1 under the BIOS Setup and restarting the system from windows.
- Updated the Intel RC code.
- Updated the Intel MRC code.
- Updated the Intel CPU microcode for R0/S0 stepping processor.
- Updated the Intel GOP to v9.0.1036.
- Updated the Intel VBIOS to v9.0.1030.
- Updated the Intel ME firmware to v11.0.0.1180.
- Improved security of UEFI code and variables. HP strongly recommends promptly transitioning to this updated BIOS version which supersedes all previous releases.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

Version: A0.10 Rev.A

Fixed in this release: - Updated the Intel RC code.
- Updated the Intel MRC code.
- Updated the Intel CPU microcode.
- Updated the Intel GOP to v9.0.1035.
- Updated the Intel VBIOS to v9.0.1028.
- Updated the Intel ME firmware to v11.0.0.1173.
- Supported the new chassis FAN control.
- Supported the WD 3TB HDD.
- Improved the POST time.
- Fixed the system can't enter S3, after the AC power remove.

** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.

 

 

HP Recommended

Thanks for the help!

HP Recommended

You're very welcome. 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.