Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post

"We can't find your camera" Error code: 0xA00F4244 <NoCamerasAreAttached>

HP Recommended
24-g062a All In One
Microsoft Windows 10 (64-bit)

Windows 10 Home 64-bit Version: 17134.829

AMD A6-7310 APU with AMD Radeon R4 Graphics

Need help to get camera working as this is a new PC. 

17,747 14,629 1,301 2,106
Message 2 of 2
Flag Post
HP Recommended

Hi! @Aquivarh,


Do you see the webcam drivers listed in the device manager?


Try updating the BIOS and webcam drivers on the PC and check if it helps.


Update the BIOS using this link. Click Here


Update the chipset drivers using this link. Click Here


Also, Try the steps recommended below and check if it helps.


In Windows, search for and open Device Manager.
Double-click Imaging Devices to expand the list of webcam drivers.
If there is no Imaging devices category listed in Device Manager, stop using these steps and see the section Webcam is not listed in Device Manager in this document.
If more than one webcam driver is listed, right-click the driver and select uninstall for any driver that is not the HP Webcam-101 or Microsoft USB Video Device driver. Once the other drivers have been removed, restart your computer and open your software. If problems persist, continue using these steps.
Right-click the name of the webcam in the Images Devices category (HP Webcam-101 or Microsoft USB Video Device), and select Update Driver Software.
Click Browse the computer to select a specific USB Video Device driver.
Double-click Imaging Devices to expand the list of webcam drivers, right-click the webcam driver, and then select Properties.
Make a note of the existing name of the webcam driver (Example: HP Webcam), as it might change after the update.
On the Webcam Properties window, select Update Driver.
Select to Browse the computer for the desired driver.
Click Let me pick from a list of device drivers on my computer.
Remove the selection from Show compatible hardware.
Select Microsoft in the Manufacturer field, and select USB Video Device in the Model field.
Click Next to install the webcam driver.
Allow the installation of the USB Video Device, and then click Close.
After the device has been updated to USB Video Device in Device Manager, restart your computer and open your software.
If problems persist, install the latest BIOS update from HP and get all the latest Windows updates from Microsoft.


Also, try the steps recommended below.


1.    Navigate to Control Panel, Hardware and Sound and Power Options.
2.    Select ‘Change power settings’ next to the active power plan.
3.    Select ‘Change advanced power settings’ text link.
4.    Select ‘Change settings that are currently unavailable’.
5.    Find Graphics Settings or PCI Express and Link State Power Management and set to Maximum performance, depending on what computer you have.
6.    Find Wireless Adapter Settings and set to Maximum performance.
7.    Reboot your computer and retest.


Refer this article to further troubleshoot webcam issues with the PC. Click Here


Let me know if this helps!

Have a great day! 🙂


Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation