Access OSD menu on HP Envy All-In-One 27-bxx

[RealDadDude]

How do I access the OSD menu on my HP Envy All-In-One?  There is not an OSD or Menu button on the display.  I have seen it pop up briefly when I've moved my keyboard, so I think it may be some sort of keyboard combination, but I don't know what that is.  I'm not finding anything in the manual about it.  Appreciate the help.

[Pallipurath]

Hi @RealDadDude 

Welcome to the HP Support Community.

Thank you for posting your query.

On HP Envy All‑In‑One desktops, the On‑Screen Display (OSD) menu is accessed using the physical buttons located on the side or bottom edge of the display, To access the OSD menu on your HP Envy All-In-One, follow these steps:

Power On the Device

• Ensure your HP Envy All‑In‑One is turned on.

Locate the Buttons

• On most Envy All‑In‑One models, the OSD control buttons are on the right side of the monitor (sometimes on the bottom edge).
• These buttons are not labeled on the front, so you need to feel for them.

Activate the Buttons

• Press any of the side buttons once to bring up the OSD overlay.
• This will display the available options on screen.

Enter the OSD Menu

• Press the Menu button (usually the middle or top button among the group).
• The OSD menu will appear, allowing you to adjust brightness, contrast, color, input source, and other display settings.

Navigate and Adjust

• Use the Up/Down buttons to scroll through options.
• Press OK/Menu to select.
• Press Back/Exit to return or close the menu.

Hope this helps, Please revert if the issue persists.

Take care and have an amazing day!

[RealDadDude]

There are no physical buttons along the edge of the monitor.  I have thoroughly checked.  I have seen the OSD menu pop up when I was moving my keyboard, which makes me think it is some keypress combination or function key.  I am just not sure which and I've tried several without success.  

[Pallipurath]

Hi @RealDadDude 

Welcome to the HP Support Community!  

  

We're here to help you tackle that hardware malfunction! Don't worry, we've got your back!  

I would request you to please share me the Serial Number of the Unit Via private message.

  

To get you the best assistance, we need to take this conversation to a private chat. We're inviting you to a private message to protect your privacy and ensure that any sensitive information remains confidential.  

  

To access your private message, just click the little blue envelope icon on the upper right corner of your HP Community profile, next to your profile name. Alternatively, you can click on this link.  

You can use this link as well:  

Private Messages - HP Support Community 

We're looking forward to helping you resolve this issue!  

  

Stay tuned, and thanks for your patience!  

  

Best regards, 

[RealDadDude · Accepted solution]

To access the OSD menu, the All-In-One will need to be used as an external display for another computer plugged into the All-In-One's HDMI input port.  When in that mode, pushing the UP button on the All-In-One keyboard will display the OSD menu on screen.  You can then use the arrows and enter key on the All-In-One keyboard to navigate the menu.