cancel
Showing results for 
Search instead for 
Did you mean: 
Franders
New member
1 0 0 0
Message 1 of 2
3,054
Flag Post

Solved!

Display issue on wake up

HP Recommended
Pavilion, model 590 – P0063 NA
Microsoft Windows 10 (64-bit)

I have an HP pavilion monitor, model 23xi, and an HP desktop PC (Win 10) model 590 – P0063 NA.

On start-up the screen displays correctly. However, if I allow the PC to go into sleep mode and then later wake it up, the far right-hand end of the display is no longer viewable. The screen appears to have jumped about 1 inch to the right and there is no way to centralise/restore it. The only way I can find to overcome this issue is to power down the PC and restart it, when once again the full screen content is viewable. This is a most frustrating annoyance and I should be very grateful if someone advise how to cure it.

1 ACCEPTED SOLUTION

Accepted Solutions
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 31,117 2,618 3,994
Message 2 of 2
Flag Post
HP Recommended

@Franders I suggest you make a few changes to the way sleep mode works under power options:

  • Change - "Put the computer to sleep" to preferred time,
  • And Change - "Turn off the monitor" to never.

If the issue persists, try the below steps:

Disabling the hybrid sleep, followed by updating all available Windows updates and the BIOS update from the HP website, please follow the below steps to disable the hybrid sleep after performing a hard reset on the device should help resolve the issue.

  1. In Windows, search for and open Control panel.

  2. Make sure the View by setting is set to Category, and then click Hardware and Sound.

  3. Click Power Options.

  4. Click Change plan settings for the power plan that is selected.

    Changing  the plan settings

  5. Click Change advanced power settings.

    Clicking Change advanced power settings

  6. Expand Sleep, and then expand Allow hybrid sleep.

  7. Select Off from the On battery drop-down menu, and then select Off from the Plugged in drop-down menu.

    Selecting Off in the On battery drop-down menu
     

  8. Click OK.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & FOLLOW THE STEPS UNDER - The computer does not wake up from sleep or hibernate mode.

(By the end of this article all the issues should be resolved)

 

P.S: Welcome to HP Community 😉

 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

Riddle_Decipher
I am an HP Employee

View solution in original post

0 Kudos
1 REPLY 1
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 31,117 2,618 3,994
Message 2 of 2
Flag Post
HP Recommended

@Franders I suggest you make a few changes to the way sleep mode works under power options:

  • Change - "Put the computer to sleep" to preferred time,
  • And Change - "Turn off the monitor" to never.

If the issue persists, try the below steps:

Disabling the hybrid sleep, followed by updating all available Windows updates and the BIOS update from the HP website, please follow the below steps to disable the hybrid sleep after performing a hard reset on the device should help resolve the issue.

  1. In Windows, search for and open Control panel.

  2. Make sure the View by setting is set to Category, and then click Hardware and Sound.

  3. Click Power Options.

  4. Click Change plan settings for the power plan that is selected.

    Changing  the plan settings

  5. Click Change advanced power settings.

    Clicking Change advanced power settings

  6. Expand Sleep, and then expand Allow hybrid sleep.

  7. Select Off from the On battery drop-down menu, and then select Off from the Plugged in drop-down menu.

    Selecting Off in the On battery drop-down menu
     

  8. Click OK.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & FOLLOW THE STEPS UNDER - The computer does not wake up from sleep or hibernate mode.

(By the end of this article all the issues should be resolved)

 

P.S: Welcome to HP Community 😉

 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

Riddle_Decipher
I am an HP Employee

View solution in original post

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation