HDMI Input toggle to 2 PC's

[contractsman2]

I just puchsaed a new Envy all-in-one 27 PC.  The PC has an HDMI input that I will use to display images from my work Laptop.  My previous Envy 23 all in one had a physical switch so I can toggle between the 2 PCs on the same display.  On this new all in one, I can display the laptop  by right clicking on the mouse for the HDMI input.  My issue is how to I get back to the Envy 27 display without either shutting off the laptop or putting it in sleep mode. Am I missing something?

[contractsman2 · Accepted solution]

I found thew switch on the back of the base of the PC

[James100A]

This was useful. Thank you. However, I have two HDMI input (All-in-one HP Envy) and I cannot figure how to switch between the two HDMI inputs. The toggle and the switch in the back of the PC only moves from HDMI 1 input to PC screen. How do I get to see the input from HDMI 2?

Thanks

[contractsman2]

Check the nomenclature on the base to make sure they are both inputs.  I have one HDMI "In" and One HDMI "out".  not 2 "in". If you have 2 inputs,  I would think you would press the button a second time to move the the second input provided a signal is being detected.  I could be wrong.

[James100A]

Thank you. You were right. The other one was HDMI output!