HP 22f monitor turing on but not showing anything but blinking when connected with HDMI

[shyamram11]

 

[Sneha_01]

Hi @shyamram11,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

If your HP 22f monitor is turning on but not displaying anything and is blinking when connected via HDMI, there could be several potential issues causing this behavior. Here are steps to diagnose and potentially resolve the issue:

Basic Troubleshooting Steps

Check Cable Connections:

• Ensure the HDMI cable is securely connected to both the monitor and the computer.
• Try disconnecting and reconnecting the HDMI cable.

Test with Another HDMI Cable:

• Sometimes, a faulty HDMI cable can cause display issues. Try using a different HDMI cable to see if that resolves the problem.

Test with Another Device:

• Connect the monitor to a different device (another computer, laptop, or gaming console) using the HDMI cable to check if the issue persists. This will help determine if the problem is with the monitor or the original device.

Check Input Source:

• Make sure the monitor is set to the correct input source. Use the monitor's on-screen display (OSD) menu to select the HDMI input manually.

Further Troubleshooting

Update Graphics Drivers:

• If the monitor works with other devices, update the graphics drivers on the original device.
• Go to the device manager, expand "Display adapters," right-click your graphics card, and select "Update driver."
• Follow the prompts to search for updated drivers automatically or download the latest drivers from the manufacturer's website.

Adjust Display Settings:

• Sometimes, the display settings might be set to an unsupported resolution or refresh rate.
• Right-click on the desktop, select "Display settings," and ensure the resolution and refresh rate are set to values supported by your monitor (1920x1080 at 60Hz for the HP 22f).

Perform a Monitor Reset:

• Use the monitor's OSD menu to reset it to factory settings. This can resolve issues caused by incorrect settings.

I hope this helps.

Take care and have a good day.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

Rachel571

HP Support