Inputs

[rfgoggin]

Is there a way to switch inputs without physically pressing the button on the back?

[Garp_senchau · Accepted solution]

@rfgoggin, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

To switch inputs on the HP OmniStudio X 31.5 inch All-in-One Desktop PC 32-c0000 series without physically pressing the button, you can use a remote control if it is available with your device. This feature is often supported by the unit’s built-in system. However, if you do not have a remote, you would typically need to manually press the input button located at the back of the device.

Here are the possible solutions:

Remote Control: Check if your model includes a remote control or the option to purchase one, which allows you to switch inputs seamlessly from a distance.

Software Solution: Some All-in-One PCs might support switching inputs via software installed on the computer. Update your display drivers or look for any HP utility software that might offer this functionality.

Settings Menu: Navigate through the display settings on your computer to check if there is an option to change inputs via the settings panel.

If none of the above options are available or applicable, you may have to physically press the button until a more convenient solution or accessory is made available.

Reference: HP OmniStudio X All-in-One Desktop PC series.

I hope this helps.

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

Regards,