cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Ivan61
New member
1 0 0 0
Message 1 of 3
407
Flag Post

No input signal

HP Recommended
Microsoft Windows 10 (64-bit)

Hi i my monitor is saying signal input not found and video card and all so i started asking my friends for help and we opened the pc and tried to clean it and we arranged it correctly but after that it still says input signal not found this issue was 2 years ago but i found a reason how to open it 2 years ago but now i tried everything that i can but it still wont open i tried calling a computer expert they fixed it but after a day it went back and i cant open it can someone please help me

2 REPLIES 2
praveenbv
HP Support Agent
HP Support Agent
7,672 7,665 330 397
Message 2 of 3
Flag Post
HP Recommended

Hi@Ivan61, Welcome to the HP Support Community!

 

As I understand you have the message - No input signal found,

Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details: 

Did you check if the resolution is too high for the monitor? did you try reducing the resolution and check if it works?

Does it work with an alternate monitor?

 

While you respond to that, here's what you need to do:

Messages display on the monitor when the computer starts, shuts down or enters suspend mode. Some messages that can display are:

  • Going to Sleep
  • No input signal
  • No signal detected
  • Signal Out of Range
  • Sync Out of Range
  • Cable disconnected
  • Check cable connection
  • Warning-PC entering power save mode

    ... or similar.

These messages are normal when the computer truly goes into sleep mode or loses the video signal (such as when the computer is turned off). However, if the monitor displays any of these messages when the computer should be displaying video, something is wrong.

If you suspect the monitor should be displaying an image from the PC instead of the message, use one of the following sections that match how the monitor behaves after the computer is powered on:

CLICK HERE FOR MORE STEPS AND INSTRUCTIONS.

(By the end of this article all the issues should be resolved)

 

 

Keep me posted. Happy to help!

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

Was this reply helpful? Yes No
praveenbv
HP Support Agent
HP Support Agent
7,672 7,665 330 397
Message 3 of 3
Flag Post
HP Recommended

Greetings! 

  

This message is from the HP Support team, 

  

Just needed to know if all your queries were resolved? 

  

If not, I could help you get there. 

  

If you would like to thank us for our efforts to help you, go to the public post & give us a virtual high-five by clicking the "Thumbs Up" icon below, followed by clicking on the "Accept as solution" on my public post. 

  

Have a great day ahead! 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation