Screen replacement

[Necey35]

Which screens can I use to replace my all in one touch? 24-cb1023w

[Raj_05]

Hi @Necey35,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

For replacing the screen on the HP All-in-One 24-cb1023w, you'll need to find a compatible screen that matches the size, resolution, and connector specifications of the original. The HP 24-cb1023w typically uses a 23.8-inch Full HD (1920x1080) touchscreen display.

Key Considerations:

• Size and Resolution: Ensure the replacement screen is 23.8 inches with a Full HD (1920x1080) resolution to match the original.
• Touchscreen Technology: The 24-cb1023w has a capacitive touchscreen, so you'll need to find a touchscreen panel with similar technology to ensure functionality.
• Connector Compatibility: Check the connector type of the original screen. Most HP All-in-One systems use a LVDS (Low Voltage Differential Signaling) or eDP (embedded DisplayPort) connector. Make sure the replacement screen has the same connector.
• Model-Specific Compatibility: Look for screens that are specifically designed for the HP All-in-One 24-cb series, as they will be more likely to match the mounting holes, connectors, and other specifications.

Compatible Screen Models:

• HP 24-cb1023w has a 23.8-inch IPS touchscreen panel, so look for replacement screens with the same touch technology and size.
• Third-party sellers like eBay and Amazon may have compatible screens, but it’s important to verify model numbers and reviews to ensure proper fitment.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support