• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
Microsoft Windows 11

how to hdmi in put used

1 REPLY 1
HP Recommended

@Pramod241, Welcome to the HP Support Community!  

  

Thanks for reaching out about your query regarding How To Use HDMI Input! 

We're thrilled to have the opportunity to assist you and provide a solution.  

  

When your computer is connected to a monitor with an HDMI cable but the screen display or sound does not work correctly, follow these steps to troubleshoot:

1. Reset the HDMI Connection

  1. Disconnect the HDMI cable from both the computer and the monitor.
  2. Compare the HDMI connector to the HDMI port to ensure they match.
  3. Reconnect the HDMI cable to both the computer and the monitor.
  4. Set the input source on the monitor to match the port the HDMI cable is connected to.

2. Configure Sound Settings

  1. On your computer, go to the Sound Settings:
    • Select Start, type "Sound Settings", and select it from the results.
  2. Open the Sound Control Panel:
    • Select the connected monitor and click Set Default.
    • Click Properties, select the Levels tab, and set the monitor volume to at least 75, then click OK.

3. Use Windows Troubleshooter

  1. Open the Windows Audio Troubleshooter:
    • Select Start, type "Audio Troubleshooter", and select Find and fix problems with playing sound from the results.
  2. Follow the on-screen prompts to diagnose and fix the issue.

4. Reset the Computer

  1. Shut down the computer and disconnect any cables, including the power cable.
  2. If using a laptop, remove the battery if possible.
  3. Press and hold the power button for 15 seconds.
  4. Reconnect the power adapter and power on the computer.  

 

Hope this helps! 

Take care, and have an amazing day!  

  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

  

Regards, 

ZOEY7886
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.