monitor issue

[itassistant]

i have a mintir uder warrenty and this is stop working and display goes back 

[Venom21]

Unplug the display cable from the GPU (back of the PC), wait a few seconds, then plug it back in firmly until it’s fully seated. 

Unplug the same cable from the monitor and reinsert it firmly. If it’s DisplayPort, make sure the latch clicks; if it’s HDMI, push till it’s fully in. Turn the monitor on, then boot the PC.

Make sure to set correct input HDMI or DP from monitor OSD menu. You can also swap connection if possible 

[itassistant]

i have check all things but half dislay is working half showing blank, it was pannel or display issue.

[Venom21]

Then use warrenty and get replacement. If you just recently purchase it then check if it's still under replacement policy, if it is then use it and get fast replacement.