-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Wireless and Networking
- Drivers for Network Missing
Create an account on the HP Community to personalize your profile and ask a question
08-30-2017 10:31 PM
Hi, so I have this PC which is a HP Z200 Small Form Factor Workstation. Had nothing on it and put a fresh install of Windows 7 32-bit. I have no internet access and have checked the Device Manager so the follwing are missing:
1) Ethernet Controller
2) PCI Serial Port
3) PCI Simple Communications Device
I have tried the drivers available in the HP support website but neither of them seem to work
Any help is appreciated thanks
Solved! Go to Solution.
Accepted Solutions
08-31-2017 03:25 PM
Hi:
Since the driver I posted didn't work, use the one directly from Intel.
The 2nd file down on the left side of the page is for 64 bit.
https://downloadcenter.intel.com/download/18713/Ethernet-Intel-Network-Adapter-Driver-for-Windows-7-
08-31-2017 07:45 AM
Hi:
For the ethernet controller, did you use this driver?
This package contains the driver for the Intel PRO/1000 PT, Intel Gigabit CT Desktop, and HP NC360T Dual-Port Network Interface Cards in the supported workstation models. This package works with the Microsoft Windows 7 Operating Systems.
http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52443.exe
The other two devices need this one driver...
This package contains the Intel Local Management Service (LMS) and Serial-over-LAN (SOL) support for the Intel Active Management Technology (AMT) in supported workstation models that are running a supported operating system. This software is part of the Intel Digital Office Initiative.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56816.exe
Now if the above ethernet driver doesn't work, please post the hardware ID for the ethernet controller, so I can figure out who makes it, and what model it is.
Use this guide for how to find the hardware ID...
https://www.howtogeek.com/193798/how-to-find-drivers-for-unknown-devices-in-the-device-manager/
08-31-2017 03:06 PM
Unfourtunately the first link does not work (even when trying from the support website) as I a Error:
The requested URL /pub/softpaq/sp52001-52500/sp52443.exe was not found on this server
The hardware ID's for the Ethernet Controller are:
- PCI\VEN8086A&DEV_10EF&SUBSYS_304A103C&REV_05
- PCI\VEN8086A&DEV_10EF&SUBSYS_304A103C
- PCI\VEN8086A&DEV_10EF&CC_020000
- PCI\VEN8086A&DEV_10EF&CC_0200
08-31-2017 03:25 PM
Hi:
Since the driver I posted didn't work, use the one directly from Intel.
The 2nd file down on the left side of the page is for 64 bit.
https://downloadcenter.intel.com/download/18713/Ethernet-Intel-Network-Adapter-Driver-for-Windows-7-