-
×InformationNeed Windows 11 help?Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
-
×InformationNeed Windows 11 help?Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
- HP Community
- >
- Desktops
- >
- Desktop Wireless and Networking
- >
- PCI data acquisition and signal processing controller driver...
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page

Create an account on the HP Community to personalize your profile and ask a question

PCI data acquisition and signal processing controller driver for hp 200 g3 all in one
07-03-2020 08:19 PM

I had HP 200 G3 all in one Desktop in which Windows 10 32 Bit is installed and found PCI data acquisition and signal processing controller driver is missing. I tried to update it through troubleshoot and Windows Update but in vain. Please help me get this problem solve once for all.
07-04-2020 07:48 AM - edited 07-04-2020 07:50 AM

Hi:
Your PC is not supported by HP for 32 bit operating systems.
The only suggestion I can offer would be to see if the W10 chipset driver from Intel installs that device.
Download, unzip and run the setup application.
https://downloadcenter.intel.com/download/29634/Chipset-INF-Utility?product=1145
07-06-2020 07:06 AM

Then you will have to do without because the only other driver it could be, would be the Intel Dynamic Platform and Thermal Framework Driver, and there are only 64 bit drivers for that.

Didn't find what you were looking for? Ask the community