cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
Tohru
New member
2 1 0 0
Message 1 of 4
4,138
Flag Post

Solved!

Searching ethernet driver for Thin Client t5740, Windows 7 32bit

HP Recommended
Thin Client t5740
Microsoft Windows 7 (32-bit)

Hello,

 

i'm searching a network driver for the onboard ethernet port in a Thin Client t5740, for Windows 7 32bit.

After a fresh Windows install everything worked out of the box, except the lan port wasn't detected by Windows.

 

The Ethernet-Controller has the following Hardware-IDs:

 

PCI\VEN_14E4&DEV_1692&SUBSYS_969214E4&REV_01
PCI\VEN_14E4&DEV_1692&SUBSYS_969214E4
PCI\VEN_14E4&DEV_1692&CC_020000
PCI\VEN_14E4&DEV_1692&CC_0200

 

A Google search for the Hardware-IDs didn't helped me. Some results may assume it is a Broadcom chip. So I tested some Broadcom drivers, but non of them worked.

 

Maybe someone has a clue what could help?

1 ACCEPTED SOLUTION

Accepted Solutions
Paul_Tikkanen
Level 21
Level 21
141,336 64,900 22,050 33,971
Message 2 of 4
Flag Post
HP Recommended

Hi:

 

See if this driver works.   Try manually installing the driver if the auto install method doesn't work.

 

This package provides the drivers for the Broadcom NIC in the supported desktop models and operating systems.

 

https://ftp.hp.com/pub/softpaq/sp55001-55500/sp55284.exe

 

It does have the generic hardware ID (PCI\VEN_14E4&DEV_1692) in the setup information file...

 

%F_NAME0% = DEV_KEY2.NTx86.6.0, PCI\VEN_14e4&DEV_1692

View solution in original post

Was this reply helpful? Yes No
3 REPLIES 3
Paul_Tikkanen
Level 21
Level 21
141,336 64,900 22,050 33,971
Message 2 of 4
Flag Post
HP Recommended

Hi:

 

See if this driver works.   Try manually installing the driver if the auto install method doesn't work.

 

This package provides the drivers for the Broadcom NIC in the supported desktop models and operating systems.

 

https://ftp.hp.com/pub/softpaq/sp55001-55500/sp55284.exe

 

It does have the generic hardware ID (PCI\VEN_14E4&DEV_1692) in the setup information file...

 

%F_NAME0% = DEV_KEY2.NTx86.6.0, PCI\VEN_14e4&DEV_1692

Was this reply helpful? Yes No
Tohru
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Yes, the ethernet is working perfectly now.

Thank you very much, this helped me a lot.

Was this reply helpful? Yes No
Paul_Tikkanen
Level 21
Level 21
141,336 64,900 22,050 33,971
Message 4 of 4
Flag Post
HP Recommended

You're very welcome.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation