• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Join the HP Community Solve‑a‑thon | Help Others & Share Your Solutions | Live on Zoom | 2:30 PM to 2:30 AM IST | Every Wednesday Click here to know more
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended
Pavilion 570-p017c
Microsoft Windows 10 (64-bit)

I'm interested in adding a 2nd internal hard drive and I've only taken a quick look inside the case.  It looks like there's a spot for the 3.5 in. main drive, already installed, and a spot for a 2.5 inch drive.  However, it appears at first glance at least, that there's only 2 sata connections and both are already used (HD and DVD drive).

 

Am I missing additional SATA connections that would allow me to mount a 2.5in drive?  I wanted to add an SSD as the main drive running the OS and use the drive that came with it as a storage drive.

 

Thanks!

2 REPLIES 2
HP Recommended

Hi,

 

Please check a similar discussion for the same series:

 

    https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-Pavilion-Desktop-570-p055na-...

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




HP Recommended

 

 

Thanks.  One of the other manuals listed under the general 570-p000 help shows spots for 2 drives:

http://h10032.www1.hp.com/ctg/Manual/c05305887c

 

And when I opened the case, it looks like there was the spot mentioned on the above for a 2.5 in. drive.  

 

My main concern was the SATA connectors on the motherboard, of which it looked like there were two and both occupied.  Looks like I may be able to get around that with a PCI-E or M.2 Sata card.  The question then becomes the one posed here, if that drive can be made bootable, which appears to still not have a final answer:

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Booting-from-M-2/m-p/6098692

 

 

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.
-->