Auto Adjustment in progress

[xiaohui]

Hi

I had a problem lately with my HP2311f monitor.

It keep prompting the "auto adjustment in progress" everynow and then.

Can anyone assist to help me stop this problem. 

Thank you

[HardBeatZ]

Hello xiaohui,

The first thing you should try is just doing a power reset on the monitor.

1. Disconnect the power from the monitor
2. Disconnect the cables from the back of the monitor to the computer
3. Reconnect the monitor back to the power
4. Connect the monitor to the computer

If that still causes it to present the problem try resetting to factory

1. Press the menu button to access the OSD (on screen display)
2. Use the plus and minus keys to navigate the menus and select Factory Reset

Use the monitor for a bit and see if the problem comes back.

[xiaohui]

HI

I had tried the way stated in your reply but it does not work.

It is still prompting out and i had update the Nividi Graphics driver too.

Thanks

[HardBeatZ]

Hello xiaohui,

Do you have an HP Computer? You should try running the monitor troubleshooting from the HP Support Assistant it will test the monitor and attempt to correct any wrong settings.

Did you also try a Factory reset on the monitor?

[xiaohui]

Hello

I had a HP computer and did use the HP Support Assistant to troubleshoot but the problem still arise back.

And i did a factory reset too but the problem arise back again.

Thanks

[HardBeatZ]

I don't think it's a hardware issue, so possibly your resolution settings that you have configured. What make / model system do you have and what video card?

Have you tried changing the screen resolution. The monitor supports up to 1920 x 1080, but your video card may not and thus there is some conflict between the resolutions that are set. Your video card drivers may also need to be updated.

[DarioGass]

i have the same problem with HP w1907v from a day. what i have to do? i follow your help but it doesnt work.

sorry for my bad english.

thank you for attention.

[HardBeatZ]

Hello DarioGass, The maximum resolution your monitor supports is 1440 x 900. What is your resolution set to? What is the maximum resolution of your video card? What video card do you have installed?

[DarioGass]

Hi. My resolution set is 1440x900, the same resolution for my monitor. I have a HP computer, that has installed a NVIDIA geforce 8600 GT. I don't know the maximum resolution of my video card, but i think is more higher than the monitor resolution. I had PC and monitor HP since four-five years, and this problem happened 2-3 days ago.

[HardBeatZ]

If it just started happening a couple days ago then it's not a resolution issue so that's ruled out. So to rule out things you've done 1. Factory reset on the monitor 2. HPSA monitor troubleshooting So with those things gone it may be a hardware issue, can you try moving the monitor to another computer to see if the problem happens on another machine.