cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
mar_wagner
New member
1 0 0 0
Message 1 of 1
309
Flag Post

BIOS POST Message after connecting a 3rd party card reader via USB

HP Recommended
Z440
Microsoft Windows 10 (64-bit)

Hi there, I'm using Z440 workstation where I installed a 3rd party Card Reader which I had to connect with internal USB connector on mainboard. For that I disabled a Rear USB Port and connected the card reader on that place.

 

The card reader is running without problems but from now on every startup, I get a Bios POST message that a USB Port is not running which is correct but OK. I have to hit a key so that the PC starts up correctly.

 

My question: How and where can I disable this message?

 

Thanks for your support.

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation