• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended

You're very welcome, John.

 

That is great news to read.

 

Best Regards,

 

Paul

HP Recommended

Paul,

Any thoughts on why this happened in the first place?  Thinking back on things I'd noticed a few months back when I was running some games the fan would run a bit louder than normal but ultimately would slow back down again when I stopped with the games.  But now the fan runs like it did when the computer was brand new.  It is literally not possible to hear it even with the case open.  I can't believe it.  Well at least I learned how to use thermal paste.  I've done a lot of hardware installation over the years but have never dealt with a heatsink and CPU.  When I started with computers there was no such thing as a heat sink because the small CPUs never generated enough heat to need one.  My first computer was a Commodore 64 and we thought we went to heaven when I got my first 286.  Things sure have changed.  For all of your incredible help and kindness, a heartfelt thanks.

John Z

HP Recommended

You're very welcome, John.

 

It is really hard to say what could have caused it. It is possible the processor heat sensor got stuck and clearing the CMOS fixed it.

 

I would also say that you must have done a bang-up job installing the processor, heat sink and thermal paste because of how nice and quiet the processor is running. That means there is an optimum heat transfer going on there.

 

I have done it a few times. I once put on too much electrically conductive paste and blew up my processor and motherboard. I have put on too little and it was running too hot, so I had to re-do.

 

I have also done it successfully several times as well. I wasn't a total klutz.

 

I started out with an Atari 800 and you could buy the optional BASIC language cartridge for it. I took a BASIC programming course in college, so I could write some elementary programs, but mostly I bought it to play Pac-Man, Space Invaders and Centipede .  :generic:

 

My first "real" PC was an old Acer with a 486/66 DX processor, 8 MB of memory, a 512 MB HDD and a 2x CD-ROM, Windows 3.1.

 

Once again, I am very happy that you were able to get your PC back to like new condition, for the price of some thermal compound, and a few gray hairs.

 

Paul

HP Recommended

Paul, The gray hairs were there a long time ago.  If you ran 3.1 then you are too familiar with writing autoexec.bat files and config.sys.  I felt robbed when W95 came out.  It spoiled all the fun I used to have and ended my guru status among my friends.  I would have done a lot for a 486 man!  Take care and thanks once again.

John

HP Recommended
Paul, I have the same problem. Fan screeches!! Have opened side, looking at mother board, do not see anything aout JBAT. Plenty of satas. Please help me.
HP Recommended

I purchased HP Pavilion dv2800t from ebay. It came with Windows Vista but I did install to Windows 7. After install to Windows 7 the CPU fan constantly high speed. I need help

 

Thanks

 

Victor

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.