cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
LE1901w
New member
1 0 0 0
Message 1 of 2
312
Flag Post

Colors problem.

HP Recommended
HP LE1901w Monitor
Microsoft Windows 10 (32-bit)

Hello Everyone, I purchased an used Desktop Video Monitor, it's HP LE1901w Monitor.

 

I bought this monitor for its features , LCD, size, display quality, generaly , it's great.

 

But , Unfortunately, i had a problem on this monitor, in relation with colors display.

 

First of all, when i start using the monitor, after being off for a while ( 2 min and more ) , i plug it in one of my two computers, Desktop computer or Laptop, everything is okay, display, colors, awesome.

 

After some minutes ( 1 to 15 min ) , there is a color changement :

 

1467019306-problem.jpg

 

This is my only problem, i tried to change VGA Cable, try with HDMI Cable, others, but in vain ... same problem, 

i tried to update the Monitor's driver but without any changes.

 

There is any solutions to try to solve this problem ? Thank you.

1 REPLY 1
MKazi
Retired
Retired
12,746 12,697 830 1,559
Message 2 of 2
Flag Post
HP Recommended

@LE1901w

 

Thanks for reaching out to us on HP Support Forums. 🙂 I came across your post and would like to help.

 

I understand that you have an HP LE1901w 19-inch Widescreen LCD Monitor. I read that the monitor display is good for the initial few minutes of powering on and later changes in relation with colors display. This happens when connected to a desktop PC and also to a laptop. The color enhancement happens via VGA and HDMI connections. You have updated the monitor drivers and the issue persists. I appreciate the steps you have performed and have certainly done a good job.

 

I suggest you to perform the following steps to fix the discoloration of the monitor:

 

To fix incorrect colors, complete the following steps:

  1. Check the video cable connections and make sure the connection is not loose. Tighten the connection screws if the connector is loose.

  2. Press the Auto or Autoselect button on the display.

  3. Press Menu, and select Factory Reset. If the screen is still discolored, continue to the next step.

  4. If the display has more than one type of connection available such as VGA, DVI, or HDMI, try a different type of connection.

  5. If possible, connect the display to another computer. If the colors are incorrect when the display is connected to the second computer, the display might be damaged or defective.

Hope this helps. Please feel free to let me know if you have any questions. Good luck! 🙂

 

Was this reply helpful? Yes No
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation