cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
teacherjapan
New member
1 0 0 0
Message 1 of 1
207
Flag Post

DIMM issues during bootup.

HP Recommended
hpz420
Microsoft Windows 10 (64-bit)

Folks, I would really appreciate some advice as to how to place DIMMS in my DIMM slots.  It's currently giving me a lot of issues.

 

I have the following

 

2x8GB DIMMS

4x4GB DIMMS

 

I have been able to configure the following:

2x8GB + 2x4GB

 

However for the life of me, I cannot find ANY configuration on the board that works for 

2x8GB and 4x4GB DIMMS at all.  I've tried numerous configs but JUST can't get it to work.  

 

The following is what the DIMM slots look like:

 

mem.JPG

 

Multiple configs of 2x8GB and 2x4GB work.  But there is nothing that let's me add the last 2x4GB AT ALL.

During posting I immidiately get red blinks.

 

Any help would be highly appreciated.

 

Oh, on a side note, I know all memory is ok as I've tested all the DIMMS by themselves in pairs and they all work.

 

Thank you SO SO much.

--Summer--

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation