Resolve Windows 10 related issues for your HP computers or printers by HP Windows 10 Support Center
Folks, I would really appreciate some advice as to how to place DIMMS in my DIMM slots. It's currently giving me a lot of issues.
I have the following
I have been able to configure the following:
2x8GB + 2x4GB
However for the life of me, I cannot find ANY configuration on the board that works for
2x8GB and 4x4GB DIMMS at all. I've tried numerous configs but JUST can't get it to work.
The following is what the DIMM slots look like:
Multiple configs of 2x8GB and 2x4GB work. But there is nothing that let's me add the last 2x4GB AT ALL.
During posting I immidiately get red blinks.
Any help would be highly appreciated.
Oh, on a side note, I know all memory is ok as I've tested all the DIMMS by themselves in pairs and they all work.
Thank you SO SO much.
Didn't find what you were looking for?
Ask the community