cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
WB3
New member
2 0 0 0
Message 1 of 4
6,506
Flag Post

Driver for Designjet 750c Plus and Windows 10

HP Recommended
Design Jet 750c Plus Printer
Microsoft Windows 10 (64-bit)

Need a driver .... Desktop running my CAD program in windows 10 with no options for any other version

Can not find a driver to match the two.  minimal computer knowledge. 

0 Kudos
3 REPLIES 3
WAWood
Level 16
Level 16
30,758 30,665 2,800 6,762
Message 2 of 4
Flag Post
HP Recommended

WB3

 

Sorry, but that's a really OLD printer and, according to the HP Product Page, the newest drivers are for XP:  http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=58271&lang=en&cc=us

 

You MIGHT be able to install them using Compatibility Mode, but I seriously doubt they will work as MS has changed their drive models a LOT since XP.

 

Good Luck

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
0 Kudos
wb2001
Level 15
Level 15
12,842 12,635 1,771 5,000
Message 3 of 4
Flag Post
HP Recommended

You can install it per these instructions.  You'll need to install the XP 32bit driver.

While very challenging, it can be accomplished.   Have fun !!!!

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
0 Kudos
mattorichardson
New member
2 2 0 0
Message 4 of 4
Flag Post
HP Recommended

I was in the same boat with my Designjet 750C+ (E/A0).

 

Install your plotter using the HP Designjet 430 driver (which is also a 42" E/AO plotter).

 

The 64-bit driver works perfectly for my Win-10 desktop, and the 32-bit driver on my Win-10 tablet

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation