• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended

I have a new elitedesk 800 g1 sff.

I'd like to carry out a fresh install of Windows 7 Pro 64bit on an SSD drive because I tried to clone it but it BSOD.

 

I'm trying a fresh install, its seen in the biso but when I boot from cd it stops and doesn't find the HD during the setup and I can't find drivers to install to go any further.

 

Am I missing something?

 

Win7 64bit Pro

elitedesk 800 g1 sff

Crucial BX100 SSD 250GB

 

Any help much appriciated.

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Spoke to both HP and Crucial, the drive isn't supported.

 

 

Only drives supported are....

 

Internal drive

320 GB up to 2 TB SATA (7200 rpm)

500 GB up to 1 TB SATA (10000 rpm)

500 GB up to 1 TB SATA SSHD

128 GB up to 160 GB SATA SSD

256 GB SATA SED

 

Crucial say HP's limitation for the drive is pretty rare and replacing it with the MX100 or the MX200 drives as those are SEDs

View solution in original post

4 REPLIES 4
HP Recommended

Windows 8 doesn't recognise it either.

HP Recommended

Just tried a smaller SSD (Kingston Technology 120GB 2.5 inch SSDNow V+200) and that worked without any issues.

 

The plot thickens.

HP Recommended

Hi:

 

See if this works...

 

Download the drivers from this link below (first or second file listed -- 32 or 64 bit as applicable).

 

https://downloadcenter.intel.com/Detail_Desc.aspx?​agr=Y&ProdId=2101&DwnldID=23060&keyword=Intel+Rap...

 

Extract (copy) the files onto a usb flash drive without any folders.

 

With the flash drive and W7 installation media plugged into the machine, boot from the W7 installation media.

 

After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.

 

You should now see the storage driver files listed.

 

If you check the box, it will only include the compatible driver.

 

Follow the prompts and hopefully, W7 will install.

HP Recommended

Spoke to both HP and Crucial, the drive isn't supported.

 

 

Only drives supported are....

 

Internal drive

320 GB up to 2 TB SATA (7200 rpm)

500 GB up to 1 TB SATA (10000 rpm)

500 GB up to 1 TB SATA SSHD

128 GB up to 160 GB SATA SSD

256 GB SATA SED

 

Crucial say HP's limitation for the drive is pretty rare and replacing it with the MX100 or the MX200 drives as those are SEDs

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.