-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Desktops (Archived)
- GTX 460 needs to be replaced - what GPUs are fully compatibl...

Create an account on the HP Community to personalize your profile and ask a question

11-03-2016 04:57 AM - edited 11-03-2016 04:59 AM
Hello. The GPU (GTX460) needs to be replaced.
Removed 460 and uninstalled its driver,
I tried installing a GTX1050 but the screen remained black.
Reinstalled 460: it works, but with the screen spots that suggest it needs replacement.
My rig: http://support.hp.com/us-en/document/c02691769 with RAM upgraded to 16GB
GTX460 has a connector that needs to be plugged in, whereas GTX1050 does not seem to have such a port: would this be the explanation why GTX1050 does not work?
A local store told me that the GTX1050 could not be supported by the HPE-540ch build. So what GPUs are there that are fully compatible?
Thank you
11-03-2016 01:31 PM - edited 11-05-2016 09:35 AM
Hi,
Your PC has a legacy BIOS and the newer graphics cards expect the BIOS to have full UEFI support. When an UEFI BIOS initializes, an UEFI graphics routine gets loaded to interact with the newer graphics cards such as the GTX 1050. When the GTX 1050 detects that it can't interact with the existing BIOS code then you will get a black screen and your PC will not boot. A HP version 8 BIOS level or higher is required for the newer graphics cards and HP has not implemented that level of BIOS for your PC.
Your best bet on a legacy graphics card would be the NVIDIA GTX 660 TI. Please review this post.
The NVIDIA GTX 480, 670 and possibly the GTX 680 might be other choices. The GTX 670 and 680 has been finicky in some PCs. Be sure to check the graphics card power supply recommendation with the graphics card manufacturer as you may need a bigger power supply.
HP Envy 17", i7-8550u,16GB, 512GB NVMe, 4K screen, Windows 11 x64
Custom PC - Z690, i9-12900K, 32GB DDR5 5600, dual 512 GB NVMe, gen4 2 TB m.2 SSD, 4K screen, OC'd to 5 Ghz, NVIDIA 3080 10GB
11-08-2016 03:01 AM
Hello again.
My old card has Interface: PCI Express x16; I have found a GTX660Ti with Interface: PCI-E 3.0: will it work on my system?
Also, the internal power connection for my old card was with one 6-pin connector. Will the GTX660Ti also work with only one 6-pin connector?
Thanks
11-08-2016 04:44 PM - edited 11-08-2016 04:49 PM
Hi,
Unless the NVIDIA GTX 660TI was flashed for UEFI which by defualt they are not then the NVIDIA GTX 660TI should work. Measure inside to make sure that the NVIDIA GTX 660TI will fit as they vary in sizes.
Most GTX 660TI that I have seen require two (2) PCIe six pin power connectors. In then situation, you will need to replace the power supply. The Corsair CX600 or CX600m would be good choices for a power supply.
HP Envy 17", i7-8550u,16GB, 512GB NVMe, 4K screen, Windows 11 x64
Custom PC - Z690, i9-12900K, 32GB DDR5 5600, dual 512 GB NVMe, gen4 2 TB m.2 SSD, 4K screen, OC'd to 5 Ghz, NVIDIA 3080 10GB
