HP Compaq Pro 6300 Small Form Factor

[PatrickS1]

I have a very confusing issue with a 6300 sff.

I would like to boot from a 32bit Windows 7 DVD but I get on each bootsquence the following massage:

“No physical memory is available at the location required for the Windows Boot Manager. The system can not continue .”

I tried the following actions:

-          HDD is blank and as NTFS formatted

-          new memory in all slots tested

-          no optional cards in any slot (PCI and PCIe)

-          BIOS set to default

-          security boot in BIOS disabled

With a HDD where Windows 7 64bit is pre installed, works the system fine.

I hope you can give me some new action´s to solve the problem.

Greetings,

Patrick

[Paul_Tikkanen]

Hi:

There should also be a Legacy Mode option in the BIOS and if you want to boot from a DVD that setting has to be enabled as well as secure boot being disabled.

[PatrickS1]

Hey,

thank you for your answer.

The UEFI mode is deaktivated and therefore the Legacy Mode activ.

I have atteched some screenshots for more information.

1. pic errormassage

2. errormassage when i try out from WIndows 7 64bit to start the Setup from Windows 7 32bit DVD

3. boot options

4. Secure Boot Configuration

[Paul_Tikkanen]

You're very welcome.

Everything in your screen shot looks fine to me so unfortunately, there must be something there that we both don't know about.

I have never seen either of those error messages before.

[PatrickS1]

Hey,

so it seems like,  there is a hardware issue.

Maybe someone else have another proposal to solve the issue?!

Greetings,

Patrick