• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.

‎04-12-2017 07:37 AM

HP Recommended
Product: HP EliteDesk 800 G2 Desktop
Operating System: Microsoft Windows 10 (64-bit)

PC: http://www8.hp.com/de/de/products/desktops/product-detail.html?oid=8741496


RFID: http://www.idtronic-rfid.com/rfid-leser/uhf/desktop-reader-evo


Gerät/Device: R-DT-EVO-HF-HID


Dieses Gerät meldet sich als Tastatur am PC an, liest automatisch HF-RFID-Datenträger und "tippt" die UID ein.

This device registers itself as keyboard to the PC, automatically reads HF RFID tags and "types" the UID.

 

…

 

Wird der PC ohne Tischleser gebootet, so wird das hp-Logo nicht angezeigt und nach ca. 5 Sekunden erscheint das Windows Logo. Der gesamte Bootvorgang dauert in diesem Fall ca. 12 Sekunden.

Without RFID device the PC shows the Windows-Logo after app. 5 seconds and is fully booted after app. 12 seconds.

 

…

 

Testfälle
Test cases

 

• Zwei Tastaturen
=> PC bootet und beide Tastaturen funktionieren
• Zwei Tastaturen und Touchscreen
=> PC bootet. Tastaturen und Touchscreen funktionieren
• Eine Tastatur + RFID-Gerät
=> PC bootet nicht*
• Eine Tastatur + RFID-Gerät mit Fremdspeisung
=> PC bootet nicht*
• Nur RFID-Gerät, ansonsten keine USB-Devices
=> PC bootet nicht*
• Nur RFID-Gerät an USB Hub mit Fremdspeisung
=> PC bootet nicht*

• Two keyboards connected to PC
=> PC boots and both keyboards are working
• Two keyboards + touchscreen connected to PC
=> PC boots and both keyboards are working, touchscreen works, too
• One keyboard + RFID device connected to PC
=> PC does not boot*
• One keyboard + RFID device via self-powered USB-Hub connected to PC
=> PC does not boot*
• Only RFID device connected to PC, no other devices connected to USB
=> PC does not boot*
• Only RFID device connected to PC via self-powered USB-Hub
=> PC does not boot*


* PC bootet nicht stimmt nicht ganz: Nach dem Einschalten dauert es ca. 80 Sekunden, bis das hp Logo angezeigt wird. Nach weiteren 110 Sekunden erscheint dann das Windows Symbol und Windows wird gestartet.

 

PC does not boot is not the full information: After power on it takes 80 seconds until the HP Logo (PC manufacturer) appears. After 110 seconds the Windows logo appears and Windows finally starts.

 

…

 

To sum this up: WITH the RFID device the PC boot very, very, very slowly.

 

 

Do you have any suggestions what to switch OFF in the BIOS to stop this blocking?


Best Regards,
Stefan Dewald (iDTRONIC support)

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.

Didn't find what you were looking for? Ask the community

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.