HP dc5750 Microtower PC 162-system option not set

[klodi]

hi..

i have a problem with my pc hp dc5750 when a start the pc the monitor show to me this :

162-sytstem option not set ....what can i do ???

P.S. This post has been splitted off from other thread in in Business PCs - Compaq, Elite, Pro, and edites its subject. - HP Forum Moderator

[ironcoog]

Usually this can be resolved by setting the default options in the system BIOS:

1. Press and hold the Power button until the PC turns off.
2. Press the Power button to turn on the PC and begin tapping the F10 key.  Release the F10 key after text is displayed on the screen of the PC.
3. After the BIOS Setup Utility is displayed, select Setup Defaults.
4. Select Save and Exit .

[Miami795]

---

@ironcoog wrote:

Usually this can be resolved by setting the default options in the system BIOS:

1. Press and hold the Power button until the PC turns off.
2. Press the Power button to turn on the PC and begin tapping the F10 key.  Release the F10 key after text is displayed on the screen of the PC.
3. After the BIOS Setup Utility is displayed, select Setup Defaults.
4. Select Save and Exit .

---

Usually...  Other suggestions?

Thank You

[nider]

a mi me salia este mismo error, le cambie la bateria y cambie la memoria ram a los puertos negros .....y se me activo una  sugerencia que muestra en f1 azul....presione   f1 y listo me mostro la secuencia de la bios para poder formatearlo...espero les ayude a los que le ocurra....!!

[Maiko-I]

Hello nider, 

We would like to encourage that this discussion should be continued in English language as this forums is a English construct-based communities as per the rules of participation (Rules(9) *see below for the url). Your post in English format will definitely help your other fellow participants to well-understand the issues and help you out regarding this.
* /t5/custom/page/page-id/hp.rulespage
HP Forums also supports few other languages for the same where you can select the language option located at the top right side of the EBC main page. 

[Bright3]

Try this or replace the battery from the motherboard.  Press f1 when your computer gives you the 162 message, and then try this, see attachment.

[M_Tamimi]

Just You Need To Change The Ram From Blue Or White Slot To Black Slot ( Slave Slot ).. And EveryThing Will Be Work..And Then You Can Set Your Bios.