cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
ZarghVA
New member
2 1 0 0
Message 1 of 6
3,516
Flag Post

HPDM 4.7SP6 Agent Update Failing

HP Recommended
HP t610
Linux

I just installed a brand new copy of HPDM 4.7 with Service Pack 6, single gateway, single repository all on the same Windows server.  I connected a t610 thin client running ThinPro 5.2 (T6X52011 - Build 11) and tried to reimage and it fails with an error stating "The HPDM Agent doesn't support ThinPro5.2+ imaging."  I then tried to update the Agent from HPDM using the default "_Update Agent" template and I get an error message stating "Failed to execute chmod 755 /tmp/replace."  

 

I can send other commands usign the built-in templates (_Capture Image, _Reboot Device, _Configure Agent) to the t610 so it appears that everything else is working.  It just won't let me reimage or update the agent.

 

I've read through the HPDM manuals, including the Imaging guide, and as far as I can tell I have configured everything correctly.  Is there something obvious I missed?

 

Thanks!

0 Kudos
Tags (2)
5 REPLIES 5
Chen_HPDM
Level 7
Level 7
504 504 51 84
Message 2 of 6
Flag Post
HP Recommended

Can you please send Update Agent task again and post the Agent.log with the full error message?

I am an HPI Employee.
My opinions are my own, and do not express those of HPI.
**Click the White Thumbs Up Button on the right to say Thanks**
0 Kudos
ZarghVA
Author
New member
2 1 0 0
Message 3 of 6
Flag Post
HP Recommended

Re-ran the task and captured the output in the task log.  Not sure where to find the Agent.log you referenced.

 

2017-02-28 13:27:27  Map repository to: Master Repository

2017-02-28 13:27:27  Successfully sent task to the Device Management Gateway

2017-02-28 13:27:34  Task has been retrieved by the Agent.

2017-02-28 13:27:36  Copy files using repository Master Repository.

2017-02-28 13:27:36  Successfully downloaded replace to /tmp from /Repository/Agents/HPThinPro5.

2017-02-28 13:27:36  Successfully downloaded hpdmagent.hpk to /tmp from /Repository/Agents/HPThinPro5.

2017-02-28 13:27:36  Successfully executed the copy task.

2017-02-28 13:27:36  Failed to execute chmod 755 /tmp/replace.

2017-02-28 13:27:36  Failed to execute Command task.

2017-02-28 13:27:36  ErrorCode: 14004022, Error Detail: Command line error.  

2017-02-28 13:27:36  Failed to execute UpdateAgent task.

2017-02-28 13:27:36  ErrorCode: 14004022, Error Detail: Command line error.  

2017-02-28 13:27:36  Failed to execute common task.

2017-02-28 13:27:36  ErrorCode: 14004022, Error Detail: Command line error.  

 

Hope that helps,

 

Thanks!

0 Kudos
Chen_HPDM
Level 7
Level 7
504 504 51 84
Message 4 of 6
Flag Post
HP Recommended

I was talking about the log files on the Thin Client side:

1. Send Configure Agent Task to set the LOG LEVEL to DEBUG

2. Send Update Agent Task which will be failed

3. Get both Agent.log and Child.log from the Thin Client> /etc/hpdmagent

 

 

I am an HPI Employee.
My opinions are my own, and do not express those of HPI.
**Click the White Thumbs Up Button on the right to say Thanks**
0 Kudos
kinzie000
Level 1
13 11 0 0
Message 5 of 6
Flag Post
HP Recommended

I actually have the same problem. So after checking the both logs what is next?

 

Please let me know.

thank you.

0 Kudos
JasonCC
Level 2
20 20 1 0
Message 6 of 6
Flag Post
HP Recommended

Are you send log files to Chen_HPDM?

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation