cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Shinracom
New member
1 0 0 0
Message 1 of 2
238
Flag Post

How to Connect 4 monitor in Extend Mode on Redeon R9 350

HP Recommended
prodesk 400 G3
Microsoft Windows 10 (64-bit)

I have HP Prodesk 400 G3 include Radeon R9 350. I need to connect 4 monitor (LG49LX310C) in Extended Mode for Network Monitoring.I would like to know the condition  and nessesary tool for do it ,such Resolution, add on cable or spliter.

Thank you.

0 Kudos
1 REPLY 1
erico
Level 17
Level 17
47,959 42,198 4,643 12,408
Message 2 of 2
Flag Post
HP Recommended

You will need to upgrade your video card to one that has four display outputs.

 

Your current video card does not.

 

You will probably need to upgrade your PSU as well. I highly recommend that you purchase and install a card that supports both legacy and UEFI BIOS.

 

I highly recommend that you purchase and install a card that supports both legacy and UEFI BIOS.

 

If you do not know what the difference is between legacy and UEFI BIOS, you will have to find that out for yourself by reading about it. Your PC has a UEFI BIOS.

 

http://multimonitorcomputer.com/top-4-best-videocard-for-multiple-monitor-computers.php

 

We do try to help, but this is not Geek 101.  You will need to do some reading online. 🙂




I am not an HP Employee.
0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation