cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Banaticus
New member
1 0 0 0
Message 1 of 1
1,496
Flag Post

How to configure a hard drive with SSA on a Proliant server

HP Recommended
Proliant ML30 Gen9
Linux

How do I use SSA to configure a hard drive on a ProLiant ML30 Gen9 server? I hooked up the harddrive to the 4x cable, plugged that into the appropriate slot on the harddrive, then used an ISO to install Fedora. Fedora installed on the HD just fine. But when I restarted the computer I still saw

Embedded Sorage : Dynamic Smart Array B1401 - SATA Optical Drive 1 - Configuration required.

1785-Slot 0b Drive Array Not Configured. Action: Use the SSA to configure the attached drives.

But I don't know how to go about doing that -- how do I access the SSA to configure the drive when I haven't yet even started the computer for the first time? The ISO was able to find and install to the HD just fine, why won't the boot sequence find it?

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation