cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
cricket_2
New member
1 0 0 0
Message 1 of 2
224
Flag Post

Hp Pavillion slimline model number s5535uk ive reset all 3 jumpers on the m/board.Now it won't boot

HP Recommended
HP pavilion WX187EA
Microsoft Windows 7 (64-bit)

Motherboard ms7613(iona-gl8t) Iv'e reset all three jumpers on this motherboard ie CMOS,PASSWORDS,and the Recovery jumper.When i now plug it in the only thing that happens is the green power light on the back comes on.!

I've downloaded all the relevent software form HP but how do i load this onto the computer ?

kind regards cricket  

1 REPLY 1
Jeet_singh
Retired
Retired
21,068 21,004 1,399 2,377
Message 2 of 2
Flag Post
HP Recommended

Hi @cricket_2,

 

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for the First Time Here? Learn How to Post and More.

 

I see from the post that you are having issues with the computer no longer boots into windows. Don't worry I'll try my best to help you with this,

 

To provide you with an accurate solution, I'll need a few more details:

Why have you reseated the CMOS, PASSWORD and Recovery jumper?

Could you elaborate more on this issue as this will help me in further assisting you?

 

HP does not recommend you to make any changes on the jumper settings. However, I have a few things that you could try these steps to either diagnose the issue or find a solution.

 

Let's start off by shutting down the computer and then open the panel and reset the CMOS battery. click here

Next thing, I would suggest here is to check if all the cables to the devices and to the power supply it's all connected firmly. 

 

Let me know how it goes for further assistance. 

Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. 

 

If you wish to help others looking for the same solution as you've found, mark the post as Accepted Solution.

If you wish to show appreciation for my effort, please click the Thumbs up icon at the bottom of my comment.

                                                          

And I Hope you have a good day, Ahead.

Regards,

Jeet_Singh
I am an HP Employee

Was this reply helpful? Yes No
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation