cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Jovetrivera
New member
2 0 0 0
Message 1 of 2
504
Flag Post

Hp compaq 7700 convertible minitower microcode error

HP Recommended
Et088av
Microsoft Windows 7 (32-bit)
My hp compaq dc 7700 convertible minitower. I upgrade my bios to 786e1 v01.16

processor e5500 @2.80ghz 1200/800mhz


but i have problem with


1801-microcode update error.

How to fix this error
0 Kudos
1 REPLY 1
Paul_Tikkanen
Level 21
Level 21
129,164 119,341 19,492 29,787
Message 2 of 2
Flag Post
HP Recommended

Hi:

 

Here is all the info you need to update the microcode for your dc7700.

  

I zipped up and attached the utility to make a bootable flash drive below, the DOS command files you need, as well as the dc7700 microcode update files.

 

You make the bootable flash drive first by running sp27608.

 

After the utility has formatted the drive and made it bootable, copy the DOS command files to it, then copy the Microcode update files (DOS Flash) to it.

 

Copy just the files in the folders, not the folders.

  

Put the flash drive in the PC, turn it on and the PC should boot to the usb flash drive.

 

At the command prompt, type Flashbin.exe and hit the enter key.

 

Follow the on screen instructions to update the microcode.

 

 

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation