The HP Community is here for you.
02-28-2009 04:48 PM
Hello. I am considering changing my computer case from the standard HP case to an Antec case. My problem is that I do not know what pins do what functions. For example, which pins go to the power button and hard drive light. My computer's motherboard is an ASUS IPIBL-LB, also known as a Benicia-GL8E. I was wondering if anyone had a spec sheet that showed what each port and pinset did.
I have googled this, and it turned up no helpful results. I also went to ASUS's website and searched for the motherboard, but ASUS's search turned up no results. I wanted to try here before I tried to contact ASUS.
Thanks to anyone who can help!
02-28-2009 09:08 PM - last edited on 04-18-2016 09:46 AM by OscarFuentes
Here is a link to the "Motherboard Specifiction" page for your computer:
Open the link and scroll down towards the bottom of the page. There you will see a diagram of your motherboard; black and white and colored. It shows all of the connections with labels.
What you can do is look for the smaller connectors. These normally power the components that you mentioned. Disconnect them to see what is not working. When you know what it does, label it accordingly. This will help when you reassemble your motherboard in the new case.
Newer PSU's come with all of the connectors labeled, which helps considerably.
I hope this helps.
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP Omen X; i7-6700K; 16 GB DDR4 2133; GTX 1070; 256 GB SSD M.2; Win 10 Home
HP Photosmart 7520 AIO
|**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**|
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.
02-28-2009 10:10 PM
Most Asus motherboard pin layouts are the same.
PIN SIGNAL DESCRIPTION
1 HD_LED_P Hard disk LED pull-up
2 FP PWR/SLP MSG LED pull-up
3 HD_LED_N Hard disk active LED
4 FP PWR/SLP MSG LED pull-up
5 RST_SW_N Reset Switch low reference pull-down to GND
6 PWR_SW_P Power Switch high reference pull-up
7 RST_SW_P Reset Switch high reference pull-up
8 PWR_SW_N Power Switch low reference pull-down to GND
9 NC No connection