-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Desktops (Archived)
- Is it possible to connect dual monitors on HP Slimline 260-p...

Create an account on the HP Community to personalize your profile and ask a question

01-11-2017 01:37 AM - edited 01-11-2017 01:38 AM
Is it possible to attach 2 monitors to HP Slimline 260-p009? Product info says on-board graphics not available if graphics card is plugged in. Can onboard VGA and HDMI be used at the same time as 2 separate displays?
01-11-2017 03:39 AM
"Can onboard VGA and HDMI be used at the same time as 2 separate displays?"
No.
If you install a low-powered video card you should be able to use the outputs on the card. Check the manufacturer's specification on the candidate upgrade video cards. The card must be low profile. Be aware that the internal power supply unit is a mere 180 Watts. You will need a card that has perhaps 512MB to 1 GB discrete VRAM.
It may be difficult to find a card that will work. FYI the BIOS in the motherboard is UEFI, not legacy.
I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
01-11-2017 03:39 PM
The HP site says the onboard graphics are disabled if another card is installed. Not sure what to believe!
note:Integrated graphics does not work if a graphics card is installed
01-12-2017 01:44 AM
@chezchic wrote:The HP site says the onboard graphics are disabled if another card is installed. Not sure what to believe!
Integrated Intel HD Graphicsnote:Integrated graphics does not work if a graphics card is installed
As far as I am aware, all HP desktop computers are that way. You can verify that by looking into the motherboard specifications of any HP motherboard going back many years.
It is the norm, so you have no choice but to accept it as a design feature put in place by HP.
But your toughest roadblock to upgrading to a video card with multiple outputs remains the same.
Finding a PSU that is higher capacity than the one installed that fits the proprietary format.
Slimline PCs are notoriously difficult to upgrade because of the physical dimensions of the case.
They are perhaps the worst case scenario for upgrading a video card with any real power.
I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
