cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
SAMBOUG
New member
1 0 0 0
Message 1 of 1
623
Flag Post

RX2660 UUID, Serial Number Recovery

HP Recommended
RX2660
Linux

Hello,

 

I recently had a problem with the HP Inegrity Server RX2660, the server could not boot up and it shows the following message:

BMC interface to IPMI failed.

then after few seconds:

 BMC cannot be accessed"
"One or more BMC ports failed"
"BMC token write failed during NUM write through"
"Invalid or Inaccessible system ID(s)".
After all these error prompts, the server then shuts down.

 

After issuing the system info under shell prompt, I noticed that the server could not get the UUID and the Serial number,

Is it possible to recover them under MP prompt (Serial rs232), knowing that under MP I have already excuted the rb, rs and tc commands with no success.

 

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation