cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
pulsev2
New member
1 0 0 0
Message 1 of 2
666
Flag Post

Re: RAM memory replacing hp compaq 6200 pro sff

HP Recommended

Bought 2 refurb 6200 pro machines. One i3 WIN10HOME and one i5WIN10PRO. Installed 2 PATRIOT PSD34G133381 4gb each in the i3. Worked. Installed 2 more for 16mb, freaked out on power up, Mem size error, beep, then proceeded to boot, just got blue screen errors alot after that. Went back to 8gb. Stable now.

 

The i5 wont take any of these ram sticks without freakout on boot. Running mish mash of 4 2gb junk refurb ram to operate on. Clocking slow. Same mem size boot error. Maybe different bus speed than i3?

 

And 32gb max? Having hard time getting 16 to work. But Crucial system scanner says 32gb max.

 

At this point, if i were to try to get to 32gb, I would take the machine in and let a tech do it. Have a feeling it would be a handful.

 

 

0 Kudos
1 REPLY 1
Anisio
Level 4
77 77 6 8
Message 2 of 2
Flag Post
HP Recommended

I had this problem a few years and was the cpu problem i change for same model i3 and it works and the store change my cpu for free. Its not comun but sometime we gotta problems from intel like a partial broken cpu will be good check your motherboard cpu slot if have some problems on pins on cpu slot.

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation