Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended
27 N010A
Microsoft Windows 10 (64-bit)

Hi there,

 

I am experiencing very slow transfer speeds with my new HP 27-N010A between my PC and my NAS. My much older PC is transferring around 78 MB/s whereas I'm only getting 11MB/s between my new PC.

 

I've updated the driver and checked that the Spped & Duplex is set to Auto Negotiation, according to my specs the controller is supposed to be 10/100/1000 - does anyone have any ideas?

 

cheers

Steve

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Problem solved.

 

Had ethernet cable going from PC to Modem Router and not plugged directly into home network. While this caused no issue with previous PC with this configuration it obviously does with the new one.

 

Now getting speeds of over 100 mb/s and the world is a better place.

 

Thanks for trying to help

cheers

Steve

View solution in original post

5 REPLIES 5
HP Recommended

Hi Steve,

 

Throughput will vary depending on data object size.  Do your measurements using large data objects.  78 MB/s may be about right for a 1 Gbps adapter. Adapter efficiency can vary by manufacturer.

 

If the NAS box is on a network, then silence the other devices during testing.

 

Go to Settings ---> Network and Internet --->Change adapter options ---> "your LAN adapter" ---> Ethernet and check your connection settings.  You should be able to verify the connection speed.  See the below image.

 

 

undefined

 

Does your Realtek Ethernet adapter have a Link Speed selection option?  See the below Intel example.

 

 

 

undefined

 

HP ENVY 6055, >Custom PC - Z690, i9-12900K, 32GB DDR5 5600, quad NVMe drives 4K screen, NVIDIA 3080 10GB
HP Recommended

Hi Dave, thanks for taking the time to answer. My ethernet status is:

 

undefined

 

and I tried setting the card to 1 GB/s Full Duplex but still got the same speed. The file I used for testing was the same one for both PCs. My older touchsmart running W10 but 5-6 years old cranked at the 78 mb/s but the shiny new one limped along at 11Mb/s.

 

Very frustrating!

cheers

Steve

HP Recommended

Hi,

 

"Frustration" is a common word and situation for many that visit forum.

 

Did your PC come with Windows 10 or did you upgrade to Windows 10 and then discovered the issue?

 

Did you use the latest driver that is posted for your PC?

 

Try booting up in safe mode and remeasure.  If wireless is enabled, you might want to disable it while testing.

 

 

 

Thanks for posting on the forum.

HP ENVY 6055, >Custom PC - Z690, i9-12900K, 32GB DDR5 5600, quad NVMe drives 4K screen, NVIDIA 3080 10GB
HP Recommended

Problem solved.

 

Had ethernet cable going from PC to Modem Router and not plugged directly into home network. While this caused no issue with previous PC with this configuration it obviously does with the new one.

 

Now getting speeds of over 100 mb/s and the world is a better place.

 

Thanks for trying to help

cheers

Steve

HP Recommended

@KiwiSteve003

 

Unbelievable:smileysurprised:  I'll have to add that solution to the list.

HP ENVY 6055, >Custom PC - Z690, i9-12900K, 32GB DDR5 5600, quad NVMe drives 4K screen, NVIDIA 3080 10GB
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.