cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Sandeep1990
New member
2 1 0 0
Message 1 of 5
438
Flag Post

Windows 10 Pro can not be joined to domain.

HP Recommended
Microsoft Windows 10 (64-bit)

Windows 10 Pro can not be joined to domain. Network path was not found error was coming every time. 

Windows firewall is disabled.

Workstation, computer browser, RPC Locator, Netbios helper service is started.

 

Please do the needful ASAP.

0 Kudos
4 REPLIES 4
WAWood
Level 16
Level 16
30,601 30,508 2,789 6,737
Message 2 of 5
Flag Post
HP Recommended

@Sandeep1990

 

Hello;

Allow me to welcome you to the HP forums!

 

Sorry, but a Domain is a Private Network -- and we would have absolutely no way of know what requirements the Administrator of that Network has placed on folks trying to join it.

 

I used to work from home, and joining my company's Domain required the use of a hardware encryption key that only they provided -- plus, I had to use an ID and Passord that they had issued to me.

 

You will have to contact the Administrator of the network domain you are trying to join -- only they will have the information you need.

Good Luck

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
0 Kudos
soccer_dan
Level 8
Level 8
1,190 1,190 73 152
Message 3 of 5
Flag Post
HP Recommended

one thing that has often caused problems was a computer whose time/date setup was beyond the required gap compared to the domain controller. i would make sure your time/date on the machine is correct and current

I work for HP. However, all opinions and comments are my own.
0 Kudos
Sandeep1990
Author
New member
2 1 0 0
Message 4 of 5
Flag Post
HP Recommended
Unable to add Windows 10 Pro client to Server 2012R2 Domain

I am able to add Windows 7, Windows 8, and Windows 8.1 clients without any issues. However, I receive an error stating the network path could not be found whenever I try to add the Windows 10 client. I have verified all settings, including authentication credentials, DNS settings, and IP settings. All devices have both IPv4 and IPv6. All clients were added from the same network using the same settings (DHCP with DNS set to the IPv4 and IPv6 servers).
0 Kudos
soccer_dan
Level 8
Level 8
1,190 1,190 73 152
Message 5 of 5
Flag Post
HP Recommended

it sounds like you may need to go to a Microsoft Windows forum to help with this

I work for HP. However, all opinions and comments are my own.
0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation