-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Desktops (Archived)
- Windows System Error - HAL event id 12

Create an account on the HP Community to personalize your profile and ask a question

04-27-2012 03:21 PM
HI,
I am running an HP Pavilion m8120n Media Center PC which has been upgraded to Windows 7 Professional (32 bit) SP1.
Current BIOS is revision 5.09 dated 06/08/2007.
I noticed from the Windows system log that each time the PC enters sleep (standby) mode it generates an error from HAL with event id 12. It says low memory has been corrupted during the transition to sleep mode.
The Microsoft documentation says this is a BIOS issue. I checked the HP support site for a BIOS update but found none listed. I noticed that HP offers BIOS updates for some notebooks to resolve this issue.
Is there a BIOS update available for the m8120n to resolve this?
Regards,
Rick
Solved! Go to Solution.
Accepted Solutions
04-29-2012
08:38 PM
- last edited on
02-21-2017
06:40 PM
by
OscarFuentes
Hi,
Did the problem occur with your previous operating system?
There is not a bios update posted for your PC.
You might want to read this article.
You could try clearing the CMOS. Since your PC is 5 years old which is about the life expectancy for the CMOS battery, you might consider replacing it. It's a $4 item.
The below suggestion is a long shot for a possible workaround if you ae not using RAID. If you don't want to try the below suggestion then you may have to live with the issue.
The default sata mode setting is RAID. If you change it to AHCI then the option rom storage might not require CMOS space. You might need to reinstall the operating system. There is a possible workaround to reinstalling the operating. Be sure to backup your data. Run this MS patch. Then boot into the bios (f10 setup) and change the controller sata mode to ACHI and save the settings. If the PC doesn't boot then change the bios setting back.
04-29-2012
08:38 PM
- last edited on
02-21-2017
06:40 PM
by
OscarFuentes
Hi,
Did the problem occur with your previous operating system?
There is not a bios update posted for your PC.
You might want to read this article.
You could try clearing the CMOS. Since your PC is 5 years old which is about the life expectancy for the CMOS battery, you might consider replacing it. It's a $4 item.
The below suggestion is a long shot for a possible workaround if you ae not using RAID. If you don't want to try the below suggestion then you may have to live with the issue.
The default sata mode setting is RAID. If you change it to AHCI then the option rom storage might not require CMOS space. You might need to reinstall the operating system. There is a possible workaround to reinstalling the operating. Be sure to backup your data. Run this MS patch. Then boot into the bios (f10 setup) and change the controller sata mode to ACHI and save the settings. If the PC doesn't boot then change the bios setting back.
