-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Desktops (Archived)
- Z240 SFF Raid setup

Create an account on the HP Community to personalize your profile and ask a question

01-03-2017 10:24 AM
Hi,
I just bought an Z240 with a built-in M.2 HP Z Turbo Drive 256 GB, and add a another HP Z Turbo Drive G2 256GB as a PCIe card. I have setup the BIOS to use RAID and also enable RST Mapping, and set the Policy to AHCI
But still the Raid controller only that one of the drive is a non-raid disk. And i cannot configure the raid that i want. I am also not promptet for the raid controller in the Post boot process. I have to go into Option Rom menu (F3) to get in touch with the Intel Raid controller.
Can somebody assist?
Cheers
01-06-2017 04:41 PM
@StephanV, welcome to the forum.
Here is the Maintenance and Service Guide for the workstation. Beginning on Page 98 is the section on "Configuring RAID devices". I suggest reading it carefully to see if helps you solve your problem.
Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.
I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!
